Again the post team can customize a post for you to confirm if this fixes your problem. The EOL has been updated already on Mac so it will by default output Windows EOLs from the next major release (end of May time frame). If you are using Windows it would not be due to the EOLs. In the mean time you can get a customized post by asking the post team at the G17/G18 space issue I suspect that you are using Mac (OS X) and that the problem is really a problem with the end of line character. So this will work from the next major release of Fusion.

Regarding, the G28 not being supported, this is common enough that I'll update all these generic posts so you can optionally turn off G28. So we cannot make a single post that fits everybody which is what we would prefer.

Use these files as you wish but with the understanding that the are “as is” and you will likely need a 3D program, like Fusion 360, to open them.Shapeoko is commonly used with Grbl, TinyG, Mach3, and EMC (LinuxCNC). Make sure to get one that is stiff enough so when you accidentally lean too much on it the computer doesn’t fall to the ground.

Mounting an on/off switch for the entire system and one for the router/vacuum has been great.Īlso the laptop table is nice. I have made one before and I must say that painting it white and adding under lighting really makes things nice. This turned out great with the leveling feet and is more than level for what I need to be tackling. I thought I would share some notes, photos, video walkthrough, and the 3D model in case anyone else was looking for some ideas or had some methods to improve.įor the build I considered open vs closed, wood vs metal, and what kind of storage and dust collection was necessary.Īfter looking at the 80/20 Aluminum Extrusion options pretty thoroughly I decided to just make it out of wood and call it a day and about 2.5 trips to Home Depot. I have been needing to make a table for the Carbide 3D Shapeoko Pro XXL I just purchased and finally got around to it.

Shapeoko fusion 360